Detector Controls
The most important part of any compressor is the detector. It is the detector that decides
how the compressor should compress. All controls except the Output (and Parallel Inject)
control the detector, but in this plug-in we have chosen to bundle the four advanced knobs
together and call them “detector controls”.
Common to all these controls is that they can be turned off by setting them in the O F F
position. Their status LED will light up when ever they are active.
Don't be afraid to keep these controls in the O F F position. Use these controls
if there is something particular that you'd like to achieve or something that
needs to be fixed. (If it ain't broken, don't fix it!)
14
Figure 9: The four advanced detector knobs.
To Next Page
Loading...