Need help?Do you have a question about the sol-ark 30K-3P-N and is the answer not in the manual?
Provides contact details for Sol-Ark support and inquiries.
Explains the meaning of various warning symbols used in the manual.
Essential safety instructions and precautions for installation and operation.
Instructions for checking package condition and noting any shipping damage.
Lists all components included in the inverter package.
Details PV input, AC output power, efficiency, and voltage ratings.
Covers battery options, dimensions, weight, enclosure, and certifications.
Specifies minimum horizontal and vertical clearance for mounting the inverter.
Lists required torque values for various terminal blocks and fasteners.
Recommended wire gauges for PV, AC, and battery connections.
Recommended wire gauges for sensor and CT sensor connections.
Illustrates the location of ports and connection points on the inverter.
Diagram for an off-grid setup with generator and smart load output.
Shows a standard wiring configuration for 120V/208V systems.
Illustrates wiring for a system with a bypass transfer switch.
Wiring for load-side AC coupling with micro-inverters.
Wiring for GEN-side AC coupling with micro-inverters.
Wiring diagram for systems utilizing a standby generator.
Wiring for grid-tied systems that also incorporate a standby generator.
Wiring for parallel systems with a bypass transfer switch.
Wiring diagram for systems with three inverters and a bypass transfer switch.
Labels and identifies the various components on the inverter unit.
Guidance on planning backup circuits considering site limitations.
Tips for installing a single system, including grid and generator connections.
Instructions and considerations for securely mounting the inverter unit.
Steps and precautions for connecting batteries to the Sol-Ark system.
Illustrates multi-terminal vs. single battery bank connections.
Detailed guide on connecting PV panel strings, MPPT limits, and Y-connectors.
Instructions for connecting generators under 54kW to the GEN terminal.
Guidance for standby generators over 54kW connected via the GRID terminal.
How to use peak shaving mode to prevent generator overloading.
Details sensor pinouts for communication and control ports.
Guide for installing current transformer (CT) sensors for power monitoring.
Information on generator start signals and communication protocols.
Steps for setting up the Wi-Fi dongle for remote monitoring.
How to connect emergency stop buttons and PV rapid shutdown signals.
Procedures for checking voltages before powering on the unit.
Step-by-step guide for safely powering on and off the inverter system.
Explains the meaning of different LED indicators on the inverter.
Steps for setting up remote monitoring using an Ethernet dongle.
Instructions for configuring Wi-Fi for remote monitoring and app access.
Guide to creating a PowerView account and logging in.
Steps for adding a new solar installation plant to the monitoring system.
Instructions for selecting the distribution network to pair the Wi-Fi dongle.
Guide to connecting the Sol-Ark system to the local Wi-Fi network.
How to view system data and status in the PowerView app.
Instructions for setting up the IP address for internet connectivity.
Steps to log into the web portal using a search browser.
Guide to connecting the system to the home Wi-Fi network via the web portal.
Displays the main screen layout and available data views.
Details the options available within the Basic Setup menu.
Setting battery bank size, max charge, and discharge rates.
Configuration for charge voltage, current, and generator charging modes.
Configuration for display brightness, auto-dim, and system time.
Detailed options for configuring battery parameters and charging modes.
Settings for power limiting, grid sell, and grid connection parameters.
Visual representation of solar production and grid power flow.
Displays detailed voltage and current readings for system components.
Overview of the System Setup menu and its sub-sections.
Settings for display, auto-dim, beep, date, time, and seasons.
Settings for load limits, peak shaving, and CT sensor ratio.
How to view alarms and set up parallel inverter systems.
Setting battery bank size, max charge, and discharge rates.
Configuring generator and grid inputs for battery charging.
Voltage thresholds for shutdown, low battery, and restart.
Settings for using the Gen terminal for smart load output.
Configuring grid sell, limited power to home, and load settings.
Setting up time-based energy management and generator input configuration.
Mode for powering only connected loads, no grid sell.
Pushes power to home without selling excess to the grid.
Allows selling excess solar power back to the grid.
Setting grid standards, reconnection times, and frequency.
Configuring voltage and frequency parameters for grid connection.
Adjusting output power based on grid frequency deviations.
Configuring voltage and reactive power adjustments based on grid conditions.
Where to install CT sensors for accurate power monitoring.
Correct wiring and orientation of CT sensors for proper function.
Using CT sensors for peak shaving and setting the CT ratio.
Steps for installing sensors and verifying their correct configuration.
Tips for operating in off-grid mode and integrating generators.
Configuring auto generator start and frequency settings.
Solutions for problems with the LCD screen and DC light status.
Troubleshooting issues related to solar production and battery charging.
Resolving issues with generator start, grid connection, and alarms.
Interpreting battery symbols and system restart causes.
Addressing LCD screen behavior and battery calibration problems.
Steps to diagnose and fix grid phase wrong errors and wiring issues.
Explains DC and AC related error codes and their common causes/remedies.
Details error codes related to batteries, communication, and generator faults.
Checklist items for verifying correct installation before system operation.
Verifying system settings, battery parameters, and Wi-Fi setup.
Details the 10-year limited warranty against defects and exclusions.
Information on product returns, authorization, and restocking fees.
To Next Page
General
