To Next PageTo Next Page
Need help?Do you have a question about the sol-ark 8K and is the answer not in the manual?
Details and identification of components included with the Sol-Ark system for installation.
Configuring essential system settings like display and time.
Setting up battery parameters such as size, type, and charge/discharge rates.
Explanation of the status indicators (LEDs) on the Sol-Ark 8K unit.
Guide to choosing and configuring different power source modes for the system.
Information on various sensors and their functions within the Sol-Ark system.
Advanced settings for battery management, including capacity, type, and charge parameters.
Procedure for automatically configuring the limiter sensors for optimal system performance.
Description of the main touchscreen interface and its navigation options.
Explanation of the screen displaying detailed voltage, current, and power readings.
Details on interpreting the grid power data displayed in the system screens.
List and interpretation of system alarms and fault codes.
Configuration of display, time, and safety settings.
Detailed configuration options for battery parameters and charging.
Configuration of power limiting parameters for grid interaction.
Settings for controlling grid sell parameters and compliance standards.
Configuration of grid frequency and type for system connection.
Description of the Bulk, Absorption, Float, and Equalize charging stages.
Explanation of the initial charging stage where full solar power is used.
Explanation of the constant-voltage stage to maintain battery voltage.
Explanation of the low-rate maintenance charging stage to prevent overcharge.
Steps to troubleshoot issues where the system's LCD screen is not displaying.
Troubleshooting steps when solar panels are connected but DC light indicator is off.
Diagnosing and resolving issues related to solar panel power generation.
Steps to identify why the battery bank is not charging correctly.
Troubleshooting the automatic generator start feature for battery charging.
Diagnosing why the normal operation LED is not illuminated.
Procedure to check system alarms when the alarm indicator is active.
Troubleshooting AC related faults such as overload or bus unbalance.
Diagnosing issues where the system connects and then immediately disconnects from the grid.
Steps to resolve DC overload faults within the system.
Troubleshooting the cause of system beeping alerts.
Safety precautions and troubleshooting for battery cable sparking.
Interpreting the red battery symbol indicating voltage issues.
General| AC Voltage | 120/240V |
|---|---|
| Max Output Power | 8000W |
| Battery Voltage | 48V |
| Max PV Input Voltage | 500V |
| AC Input Voltage | 120/240V |
| AC Output Voltage | 120/240V |
| Frequency | 60Hz |
