Need help?Do you have a question about the sol-ark 5K-IP-N and is the answer not in the manual?
Explains warning symbols and critical safety precautions for operating the inverter.
Identifies and describes the components and terminals of the Sol-Ark inverter.
Details physical dimensions, torque values, and temperature derating information.
Provides guidance on selecting appropriate wire gauges for various connections.
Instructions for correctly mounting the inverter, including clearances and orientation.
Details on wiring battery banks in series and parallel configurations.
Explains the importance and procedure for establishing a proper ground connection.
Guides on connecting PV strings to the inverter's MPPT inputs.
Instructions for connecting generators for power supply or backup.
Configuration for optimizing power usage and preventing generator overload.
How to configure the inverter to automatically start a generator.
Information on connecting external sensors and accessories for system monitoring.
Details on installing and configuring CT sensors for power metering and control.
Step-by-step guide for safely powering on and testing the installed system.
Procedure for safely cycling power to the inverter for resets or maintenance.
Explains the meaning of different LED status lights on the inverter.
Overview of the inverter's main user interface screen and its elements.
Configuration for display, time, and general system settings.
Settings related to battery capacity, charging, and discharge parameters.
Configuration for various operating modes like Grid Sell and Limited Power.
Parameters for connecting and complying with grid requirements.
A diagram illustrating common parameter programming paths.
Explanation of the 4-stage charging algorithm and battery setpoints.
Details on connecting external devices via communication protocols.
Specific grid compliance parameters for different regions.
Prerequisites and checks before configuring multiple inverters in parallel.
Step-by-step guide for programming multiple inverters for parallel operation.
Instructions for connecting the inverter to a network via Ethernet.
Steps for connecting the inverter to Wi-Fi for remote monitoring.
A list of error codes and their common causes and remedies.
A checklist for installers to ensure proper system setup for warranty registration.
Details the terms and conditions of the product's limited warranty.
General| Model | 5K-IP-N |
|---|---|
| Type | Hybrid Inverter |
| Power Output | 5000W |
| Warranty | 10 years |
| Battery Voltage | 48V |
| Max Charge Current | 100A |
| Frequency | 60Hz |
| AC Voltage | 120/240V |
| Max DC Input Voltage | 500VDC |
| Max PV Input | 6500W |
| AC Output Voltage | 120/240V |
| Operating Temperature | -20°C to 60°C |
To Next Page
