ENEN
11
4.5 ELECTROMAGNETIC COMPATIBILITY (EMC)
The electromagnetic compatibility is the ability of the product to function in an
environment where electromagnetic radiation and electrostatic discharges are
present, without causing electromagnetic interference to other devices.
4.5.1 Interference of other devices by Vector 40
Although the product meets the strict requirements of the relevant directives and standards, SOLA can
not completely exclude the possibility of interference with other devices (for example, when using the
product in combination with third-party devices, such as eld computers, personal computers, wireless
devices, mobile phones, certain cables or external batteries).
When using computers and radio equipment make sure to observe to the vendor-specic information
about electromagnetic compatibility.
Only use original SOLA equipment and accessories.
4.5.2 Interference of the Vector 40 by other devices
Although the product meets the strict requirements of the relevant directives and standards, SOLA can
not entirely exclude the possibility that intense electromagnetic radiation in the immediate vicinity of radio
transmitters, two-way radios, diesel generators, etc. can distort the measurement results.
When performing measurements under these conditions check the plausibility of the results.
To Next Page
Loading...
Need help?
General
