ENEN
18
8. Maintenance, storage and transportation
8.1 Cleaning
Wipe off the dirt with a soft damp cloth.
Check the outlet windows of the laser regularly, and thoroughly clean them if necessary. Do not touch
the glass with your ngers.
Do not use aggressive cleaning agents or solvents.
Do not immerse the device into water!
Clean and dry wet equipment, accessories and transport containers prior to packaging them. Only
pack equipment again when it is completely dry.
Keep plug connections clean and protected from moisture.
8.2 Storage
8.2.1 General
The equipment may only be stored within the specied temperature limits
(see Chapter 3 / Technical data)
.
After prolonged storage check the accuracy of the measuring device before using it.
8.2.2 Batteries
For storage, remove the batteries from the device or from the charging station.
The storage should preferably be in a dry environment at room temperature
(see Chapter 3 / Technical data)
.
Protect from moisture and humidity. Dry wet or damp batteries before storage, or before usage.
8.3 Transport
8.3.1 General
The device may be damaged by strong vibrations or by falling.
Never transport the product loose. Always use the original packaging or an equivalent transport
container.
Switch off the measuring device before transporting it.
Check the unit for damages before use.
8.3.2 Batteries
When transporting or shipping batteries, the operator is responsible for complying with the applicable
national and international laws and regulations.
Before shipping, remove the batteries from the device.
To Next Page
Loading...
Need help?
General
