Sola VECTOR 40 User Manual

13
ENEN
6. Getting Started
6.1 Batteries
1. Open the battery compartment cover on the back of the instrument using a screwdriver.
2. Insert the batteries into the instrument, observing the correct polarity.
3. Close the battery compartment cover (tighten the screw by hand using a screwdriver).
Use only AAA batteries (1.5 V).
Remove the batteries if the instrument is not used over a longer period of time.
6.2 Belt clip
To x the belt clip, insert it into the slot provided (a click will be heard when the belt clip engages).
To remove the belt clip, push the PUSH button -> A and the pull the belt clip out of the slot -> B.

Sola VECTOR 40 Specifications

General

Brand	Sola
Model	VECTOR 40
Category	Measuring Instruments
Language	English