120
Editing Data
Saving data backup to hard drive section
With the function a backup can be created and saved to a hard disk.
A Solar-Log backup file has the following file name:
solarlog_backup.dat.
Procedure
•
Click on Prepare.
•
The progress and status of the update are displayed
End current measuring
Select the USB storage device
Save configuration. After the data has been prepared, the Download option is displayed.
•
Click on Download.
•
Depending on your browser settings, a window pops up with the options to open the file with a
program or save file.
•
Select Save file.
•
The file is saved in the download folder.
Alternative procedure
•
Click on Prepare.
•
The progress and status of the update are displayed
End current measuring
Select the USB storage device
Save configuration
•
After the data has been prepared, the Download option is displayed.
•
Right click with the mouse on Download.
•
Select Save link as.
•
The file manager of your OS appears.
•
Select the desired location to save the file to.
•
Select save.
•
The file is saved in the selected folder.
Saving data backup to USB section
With this function, a backup can be saved /Backup directory of a USB stick which is directly connected to
the device.
Procedure
•
Touch Save.
•
The backup is being created. Please wait a moment
•
The progress and status of the update are displayed
End current measuring
Select the USB storage device
Save configuration
•
The solarlog_backup_YYMMDD.dat file is saved in the /Backup directory of the USB stick.
YYMMDD = year, month and day - each two digits, e.g. solarlog_backup_161212.dat is then the
backup from 12 December 2016.
The Solar-Log™ backup can be copied to another storage medium or imported into the Solar-Log™ again.
To Next Page
Loading...
Need help?
General
