How to fix Solar Control Systems controller that does not function?
If the controller isn't functioning, it could be due to an interrupted power supply or a program malfunction. Check the controller's power cable and press the reset button.
What to do if T1 error message displays on Solar SR530C8Q Control Systems screen?
If a T1 error message appears, it indicates a fault (short circuit or open circuit) in a temperature sensor. To resolve this, use the controller to request the current values from all connected temperature sensors. Replace any defective sensors and/or cabling.
Why doesn't the solar pump operate in Solar SR530C8Q?
If the solar pump isn’t working even when switch-on conditions are met, it could be due to an interrupted pump power supply. Check the pump power cable to ensure it is properly connected and receiving power.
General| Brand | Solar |
|---|---|
| Model | SR530C8Q |
| Category | Control Systems |
| Language | English |
To Next Page