SolarEdge SE7k User Manual

 SE4K SE5K SE7K SE8K SE9K SE10K SE12.5K Unit
Protective class Class I 
Utility monitoring,
islanding protection,
configurable Power
Factor, country
configurable
thresholds
Yes 
Overvoltage category III 
Input
Maximum DC power
(Module STC)
5400 6750 9450 10800 12150 13500 16850 W
Transformer-less,
ungrounded
Yes 
Maximum input
voltage
900 Vdc
Nominal DC input
voltage
750 Vdc
Maximum input
current
7 8.5 12 13.5 15 16.5 21 Adc
Maximum back-feed
current
0 Adc
Reverse-polarity
protection
Yes 
Ground-fault
isolation detection
700kΩ Sensitivity 
Overvoltage category II 
Maximum inverter
efficiency
98 %
European weighted
efficiency
97.3 97.3 97.3 97.5 97.5 97.6 97.7 %
Night-time power
consumption
< 2.5 W
-Three Phase System Installation Guide MAN-01-00057-4.1
106 Technical Specifications - Three Phase Inverters (Europe &APAC)

SolarEdge SE7k Specifications

General

Manufacturer	SolarEdge
Model	SE7k
Category	Inverter
Max. DC Power	9450 W
Max. AC Power Output	7000 W
Rated AC Power	7000 W
AC Frequency	50/60 Hz
Topology	Transformerless
Warranty	12 years
Communication Interfaces	RS485, Ethernet
Cooling	Convection
Operating Temperature Range	-25°C to 60°C