SolarEdge SE7k User Manual

the minimum optimizers are connected to unshaded modules, add more
optimizers to the string.
To allow for heat dissipation, maintain a 2.5 cm / 1" clearance distance between
the power optimizer and other surfaces, on all sides except the mounting
bracket side.
Figure 2: Power optimizer clearance
When installing modules in a confined space, for example, if installing Building-
integrated photovoltaic (BIPV) modules, ventilation measures may be needed to
ensure the power optimizers are not be exposed to temperatures outside their
specifications.
NOTE
The images contained herein are for illustrative purposes only and may vary
depending on product models.
Chapter 2: Installing the Power Optimizers 19
Three Phase System Installation Guide MAN-01-00057-4.1

SolarEdge SE7k Specifications

General

Manufacturer	SolarEdge
Model	SE7k
Category	Inverter
Max. DC Power	9450 W
Max. AC Power Output	7000 W
Rated AC Power	7000 W
AC Frequency	50/60 Hz
Topology	Transformerless
Warranty	12 years
Communication Interfaces	RS485, Ethernet
Cooling	Convection
Operating Temperature Range	-25°C to 60°C