M A C : x x x x x x x x x x x
L a s t s e e n : < D D : H H >
M F G : S o l a r E d g e
P o w e r [ W ] : 0
P o s E n e r g y [ W ] : 4
MAC: the full MACaddress of the device
Last seen: The date and time when the device communicated with the inverter
MFG: The device manufacturer
Model: The device model type
Power [W]: The energy delivered to the load
Pos Energy[W]: The energy imported from the grid (if applicable)
Inverters with SetApp Configuration
1. Go to Device Manager > Device Info.
2.
Check that the following device details are correct:
MAC Address: the full MACaddress of the device
Last Communication: The date and time when the device communicated with
the inverter
MFG: The device manufacturer
Model: The device model type
Power [W]: The energy delivered to the load
Positive Energy[Wh]: The energy imported from the grid (if applicable)
Negative Energy[Wh]: The energy exported from the grid (if applicable)
Configuration 25
Smart Energy Hot Water Installation Guide MAN-01-00570-1.4
To Next Page
Loading...