To enable the Smart Energy Hot Water functionality, the following supporting devices
must be installed:
Energy Meter:
Energy Meter with Modbus Connection. Refer to:
http://www.solaredge.com/files/pdfs/solaredge-meter-
installation-guide.pdf or
http://www.solaredge.com/files/pdfs/solaredge-meter-
installation-guide-na.pdf
Energy Meter with Cellular Connection. Refer to
https://www.solaredge.com/sites/default/files/se_energy_
meter_cellular_na.pdf
ZigBee Plug-in for Smart Energy. Refer to:
https://www.solaredge.com/sites/default/files/se-device-control-
zigbee-module-installation-guide.pdf
https://www.solaredge.com/sites/default/files/se-zigbee-plug-in-
for-setapp-installation-guide.pdf
Smart Energy Hot Water Installation Guide MAN-01-00570-1.4
8 Overview
To Next Page
Loading...