the mounting brackets to the mounting surface
the power optimizer to the racking
Wire cutters (for wires of up to 4/0 AWG)
Wire strippers (for wires of up to 4/0 AWG)
Voltmeter
For installing the communication options, you may also need the following:
For Ethernet:
CAT5/6 twisted pair Ethernet cable with RJ45 connector
If using a CAT5/6 cable spool: RJ45 plug and RJ45 crimper
For RS485:
Four- or six-wire shielded twisted pair cable
Watchmaker precision screwdriver set
Backup Interface Installation Guide MAN-01-00728-1.0
8 Installation Equipment List
To Next Page
Loading...