Solatube HSE - Add Device (Quick Start)

For the most current Installaon Instrucons, please visit www.solatube.com/instrucons
Solatube Internaonal, Inc. | 2210 Oak Ridge Way | Vista, CA 92081-8341 | www.solatube.com | T: 888.SOLATUBE
© 2020 Solatube Internaonal, Inc. Part No. 951845 v1.1
5
Add Device (Quick Start)
This funcon allows you to pair a remote to a skylight.
You can add mulple skylights to one remote by repeang this step for each skylight.
Each skylight can be added to one group or separate groups (i.e. group 1 can operate all skylights by selecng group 1 and
repeang these steps, or each skylight can be added to individual groups by repeang these steps and selecng a new group (2,
3, 4…) for each skylight being added).
Hold simultaneously the UP and
STOP buons unl the remote
enters conguraon mode.
8 8 9 5
Using UP / DOWN buons
select marked posion.
8 8 9 5
Using LEFT / RIGHT
buons select group to
which you want to assign
the device (e.g. 1)
8 8 1
Accept by pressing STOP buon.
8 8
Display will begin to count down.
Press “P” buon on skylight
being added within 12 seconds
of countdown.
8 8
1
2 1
Procedure performed correctly.
Blue backlight ashes once.
8 8
Error. Red backlight ashes 3
mes. Repeat procedure or see
page 11, point 1 or 2.
8 8
1
1
e
.
8 8 e 7
. .