1.1 Scope of Validity
This manual is an integral part of X1 Series, It describes the assembly,
installation, commissioning, maintenance and failure of the product. Please read
it carefully before operating.
Note: “3.0” means 3.0kW. ”T” means “double” MPPT strings.
“D” means with “DC Switch”, ”N” means without “DC Switch”.
“L” means with “LCD display”.
X1-5.3-T-D/X1-5.3-T-N/ X1-5.98-T-D/X1-5.98-T-N are only for India.
Keep this manual at where is accessible all the time.
1.2 Target Group
This manual is for qualified electricians. The tasks described in this manual only
can be performed by qualified electricians.
1.3 Symbols Used
The following types of safety instructions and general information appear in this
document as described below:
1 Notes on this Manual
7 Troubleshooting
7.1 Troubleshooting
7.2 Routine Maintenance
8 Decommissioning
8.1 Dismantling the Inverter
8.2 Packaging
8.3 Storage and Transportation
Notes on this ManualContents
03
02
36
36
39
40
40
40
40
X1-3.0-T-D(L) X1-3.3-T-D(L) X1-4.2-T-D(L)X1-3.6-T-D(L)
X1-3.0-T-N(L) X1-3.3-T-N(L) X1.3.6-T-N(L) X1-4.2-T-N(L)
X1-4.6-T-D(L) X1-5.0-T-D(L) X1-5.98-T-D(L) X1-5.3-T-D(L)
X1-4.6-T-N(L) X1-5.0-T-N(L) X1-5.3-T-N(L) X1-5.98-T-N(L)
DANGER！
“Danger” indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING！
“Warning” indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION！
“Caution” indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTE！
“Note” provides tips that are valuable for the optimal
operation of your product.
To Next Page
Loading...
