To Next PageTo Next PageWhat to do if SolaX Power X1-Hybrid-3.7-D electricity frequency is beyond range?
If the electricity frequency of your SolaX Power Inverter is beyond the normal range, the system will automatically reconnect when the utility power returns to normal. If the problem persists, contact your installer for assistance.
How to fix IE 001 TZ Protect Fault on SolaX Power Inverter?
To address the IE 001 TZ Protect Fault on your SolaX Power Inverter, disconnect the PV+ PV- and batteries, then reconnect them. If the issue persists and the inverter doesn't return to normal, contact your installer for further assistance.
General| Model | X1-Hybrid-3.7-D |
|---|---|
| Type | Hybrid Inverter |
| Rated Power | 3.7kW |
| Max. DC Power | 4.6kW |
| Number of MPPT | 2 |
| Max. AC Power | 3.7kW |
| THDi | <3% |
| AC Grid Connection Type | Single Phase |
| Max. Charging/Discharging Current | 60A |
| Protection Degree | IP65 |
| Topology | Transformerless |
| Rated Grid Voltage | 230V |
| Rated AC Voltage | 230 V |
| AC Voltage Range | 180V - 280V |
| Rated AC Grid Frequency | 50Hz / 60Hz |
| Power Factor | 0.8 leading - 0.8 lagging |
| Battery Voltage Range | 40V - 60V |
| Max. Charging Power | 3000W |
| Max. Discharging Power | 3000W |
| Communication | WiFi/GPRS |
| Cooling Method | Natural Cooling |
Defines the manual's coverage for X1-Hybrid G4 series energy storage inverters.
Manual is for qualified electricians, tasks only by professionals.
Explains symbols for Danger, Warning, Caution, and Notice.
Crucial safety advice regarding high voltage, electric shock, heat, and radiation.
Explains symbols on the inverter and type label, including CE, UKCA, TÜV, RCM marks.
Details European low voltage regulations, safety instructions, and system licensing.
Describes the inverter's function to convert solar energy and store it in batteries.
Illustrates wiring schemes for EPS (Off-grid) function, showing different configurations.
Details various operating modes like Self Use, Feed-in Priority, Backup, Manual, and EPS (Off-grid).
Explains the Micro-grid function allowing hybrid inverters to simulate the grid during off-grid periods.
Provides physical dimensions (W/H/D) of the inverter unit.
Identifies and describes the various connection ports on the inverter.
Lists technical specifications for DC input, including voltage, current, and MPPT ranges.
Details AC output and input specifications like power, voltage, current, and frequency.
Specifies battery compatibility, voltage range, and communication interfaces.
Covers efficiency ratings, safety standards, and protection features like grid monitoring and SPD.
Lists technical data for the EPS (Off-grid) output, including power and current ratings.
Provides general specifications like dimensions, weight, noise, temperature, and warranty.
Instructions to check the inverter for visible damage upon receipt.
Lists the accessories and materials included in the inverter package.
Safety precautions and environmental conditions to consider during installation.
Lists necessary tools for installation and equipment preparation.
Requirements for installation location, carrier, and space for heat dissipation.
Step-by-step guide on how to physically mount the inverter.
Details how to connect photovoltaic modules, including voltage limits and connection modes.
Explains connections for grid and EPS ports, including recommended cables and breakers.
Provides diagrams illustrating EPS (Off-grid) wiring configurations for different regions.
Step-by-step guide for connecting batteries, including breaker requirements and wiring diagrams.
Covers various communication interfaces like DRM, Meter/CT, BMS, COM.
Explains mandatory grounding connections for safety and fault monitoring.
Describes how to connect accessories for monitoring via WiFi, 4G, GPRS, or LAN.
A checklist of pre-operation checks before starting the inverter.
Steps for starting the inverter, checking LED/LCD status, and understanding operation states.
Important precautions and warnings before performing firmware upgrades.
Detailed steps for upgrading the inverter's firmware using a USB drive.
Describes the inverter's LCD screen, LED indicators, and control buttons.
Outlines the hierarchical structure of the inverter's menu system.
Explains how to navigate and interact with the inverter's LCD interface.
Details various work modes like Self Use, Feed-in Priority, Backup, Manual, and EPS (Off-grid).
Explains how to view system status for PV, Battery, On-grid, and EPS.
Describes how to access and interpret historical data for on-grid, EPS, and meter/CT readings.
Covers user-configurable settings like Date/Time, Language, EPS Mute, and passwords.
Access to advanced configuration parameters for grid, charger, and other functions.
Provides a guide to identify and resolve common inverter faults and issues with diagnostic steps.
Outlines regular maintenance procedures for the inverter, including safety inspections and cleaning.
Steps for safely disconnecting and removing the inverter.
Guidelines for packaging the inverter for storage or return.
Conditions and methods for storing and transporting the inverter.
Instructions for the proper disposal of the inverter and related materials.
