To Next PageTo Next PageWhat to do if SolaX Power X1-Hybrid-3.7-D electricity frequency is beyond range?
If the electricity frequency of your SolaX Power Inverter is beyond the normal range, the system will automatically reconnect when the utility power returns to normal. If the problem persists, contact your installer for assistance.
How to fix IE 001 TZ Protect Fault on SolaX Power Inverter?
To address the IE 001 TZ Protect Fault on your SolaX Power Inverter, disconnect the PV+ PV- and batteries, then reconnect them. If the issue persists and the inverter doesn't return to normal, contact your installer for further assistance.
General| Model | X1-Hybrid-3.7-D |
|---|---|
| Type | Hybrid Inverter |
| Rated Power | 3.7kW |
| Max. DC Power | 4.6kW |
| Number of MPPT | 2 |
| Max. AC Power | 3.7kW |
| THDi | <3% |
| AC Grid Connection Type | Single Phase |
| Max. Charging/Discharging Current | 60A |
| Protection Degree | IP65 |
| Topology | Transformerless |
| Rated Grid Voltage | 230V |
| Rated AC Voltage | 230 V |
| AC Voltage Range | 180V - 280V |
| Rated AC Grid Frequency | 50Hz / 60Hz |
| Power Factor | 0.8 leading - 0.8 lagging |
| Battery Voltage Range | 40V - 60V |
| Max. Charging Power | 3000W |
| Max. Discharging Power | 3000W |
| Communication | WiFi/GPRS |
| Cooling Method | Natural Cooling |
