What to do if SolaX Power Inverter electricity frequency is beyond range?
If the electricity frequency of your SolaX Power Inverter is beyond the normal range, the system will automatically reconnect when the utility power returns to normal. If the problem persists, contact your installer for assistance.
How to fix IE 001 TZ Protect Fault on SolaX Power Inverter?
To address the IE 001 TZ Protect Fault on your SolaX Power Inverter, disconnect the PV+ PV- and batteries, then reconnect them. If the issue persists and the inverter doesn't return to normal, contact your installer for further assistance.
General| Type | Hybrid Inverter |
|---|---|
| Number of MPPTs | 2 |
| AC Voltage Range | 180-280V |
| AC Grid Frequency | 50/60Hz |
| Max. Efficiency | 97.6% |
| Battery Compatibility | Lithium-Ion |
| Battery Voltage Range | 40-60V |
| Protection Degree | IP65 |
| Cooling Method | Natural Convection |
| Power Rating | 5.0 kW |
| Rated AC Power | 5.0 kW |
| Max. AC Apparent Power | 5000VA |
| Max. AC Output Power | 5.0 kW |
| Rated Grid Voltage | 230 V |
| Grid Frequency | 50/60 Hz |
| European Efficiency | 97.0% |
| Communication | WiFi/GPRS |
| Operating Temperature Range | -20 ~ +60°C |
Lists specifications for DC input parameters like voltage, current, and MPPT.
Details AC output and input specifications such as power, voltage, current, and frequency.
Outlines MPPT efficiency, maximum efficiency, and various safety/protection features.
Provides critical environmental and safety guidelines for installing the inverter.
Details requirements for the installation location, including carrier, space, and environmental factors.
Provides step-by-step instructions for physically mounting the inverter bracket and unit.
Explains how to connect photovoltaic modules to the inverter's PV inputs.
Details how to connect the inverter to the grid and for off-grid output.
Shows wiring diagrams for different off-grid configurations.
Details the requirements, breaker, and diagram for connecting the battery.
Provides step-by-step instructions for wiring the battery power lines.
Explains the BMS port definition and connection for battery communication.
Covers DRM and meter/CT communication setup and requirements.
Explains DRM requirements for demand response and grid interaction.
Describes connecting electric meters or CTs for monitoring electricity usage.
Details how to connect current transformers (CTs) to measure live wire current.
Details COM communication interface, application, and PIN definition.
Explains the mandatory grounding requirements and connection steps.
Outlines the steps for performing shell grounding and equipotential grounding.
Details how to connect monitoring accessories like WiFi or 4G.
Lists essential checks before powering on the inverter.
Covers pre-operation checks and the procedure for starting the inverter.
Lists pre-operation checks for inverter installation and connection status.
Provides crucial precautions and warnings before proceeding with firmware upgrades.
Outlines the step-by-step process for upgrading the inverter's firmware.
Provides guidance on identifying and resolving common faults and issues with the inverter.
To Next Page
