What should I do if my SolaX Power Inverter displays 'Low soc of grid-connected battery'?
If your SolaX Power Inverter displays 'Low soc of grid-connected battery', stop discharging and start charging.
What should I do if my SolaX Power Inverter displays 'Arc fault'?
If your SolaX Power Inverter is showing an 'Arc fault' message, wait for a while and observe if it returns to normal operation.
What to do if my SolaX Power Inverter displays 'PV connection configuration error'?
If your SolaX Power Inverter shows a 'PV connection configuration error', turn off the PV, battery, and power grid. Then, restart the inverter and confirm whether the PV connection is correct.
What should I do if my SolaX Power X1-Hybrid-6.0-LV Inverter displays 'Low soc of off-grid battery'?
If your SolaX Power Inverter displays 'Low soc of off-grid battery', stop discharging and start charging.
What should I do if my SolaX Power Inverter displays 'BST2 hardware overcurrent'?
If your SolaX Power Inverter displays 'BST2 hardware overcurrent', wait for a while to see if it returns to normal.
What should I do if my SolaX Power Inverter displays 'The grid voltage exceeds the allowable value 2'?
If your SolaX Power Inverter displays 'The grid voltage exceeds the allowable value 2', check whether the grid voltage is within the normal working range.
What should I do if my SolaX Power Inverter displays 'The grid voltage is lower than the allowable value 1'?
If your SolaX Power Inverter displays 'The grid voltage is lower than the allowable value 1', check whether the grid voltage is within the normal working range.
What should I do if my SolaX Power X1-Hybrid-6.0-LV displays 'BST overpower'?
If your SolaX Power Inverter displays 'BST overpower', wait for a while to see if it returns to normal.
What to do if my SolaX Power X1-Hybrid-6.0-LV Inverter displays 'Battery type configuration error'?
If your SolaX Power Inverter displays 'Battery type configuration error', turn off the PV, battery, and power grid, restart the inverter, and confirm whether the battery type is correct.
What to do if SolaX Power X1-Hybrid-6.0-LV Inverter shows '1.1 times overload'?
If your SolaX Power Inverter displays '1.1 times overload', turn off any high-power load connected to the inverter.
General| Brand | SolaX Power |
|---|---|
| Model | X1-Hybrid-6.0-LV |
| Category | Inverter |
| Language | English |
Provides critical safety guidelines and warnings to prevent injury, death, and equipment damage during installation and operation.
Details the specifications for the DC input parameters of the inverter, including voltage and current limits for PV modules.
Specifies AC input and output electrical data, including current, power, voltage, frequency, and power factor.
Details the specifications for the Emergency Power Supply (EPS) output, including power, current, and switch time.
Lists battery-related specifications such as battery type, voltage range, nominal voltage, and charging strategy.
Outlines the built-in protection features of the inverter, such as anti-islanding and over-voltage protection.
Highlights important precautions for installing the inverter, including environmental conditions and material restrictions.
Explains how to connect photovoltaic modules to the inverter, including voltage and connection mode requirements.
Details how to connect the inverter to the grid, generator, and EPS load, including breaker requirements.
Covers requirements and steps for connecting low voltage lithium and lead-acid batteries to the inverter.
Defines communication ports and their functions, including COM, BMS, DRM, and parallel connection ports.
Describes how to connect multiple inverters in parallel for increased system capacity, up to 10 units.
Details the mandatory shell grounding connection procedure to prevent electric shock.
Outlines the steps for turning on and starting the inverter after all checks are completed.
Provides a guide to diagnose and resolve common inverter faults and error messages with suggested solutions.
To Next Page
