To Next Page
A
April StewartAug 29, 2025
What to do if SolaX Power X1-Hybrid-6.0-LV shows '1.2 times overload'?
- NNicholas BallAug 29, 2025
If your SolaX Power Inverter displays '1.2 times overload', turn off any high-power load connected to the inverter.
What to do if SolaX Power X1-Hybrid-6.0-LV shows '1.2 times overload'?
If your SolaX Power Inverter displays '1.2 times overload', turn off any high-power load connected to the inverter.
What should I do if my SolaX Power Inverter displays 'Low soc of grid-connected battery'?
If your SolaX Power Inverter displays 'Low soc of grid-connected battery', stop discharging and start charging.
What to do if my SolaX Power X1-Hybrid-6.0-LV Inverter displays 'Battery type configuration error'?
If your SolaX Power Inverter displays 'Battery type configuration error', turn off the PV, battery, and power grid, restart the inverter, and confirm whether the battery type is correct.
What should I do if my SolaX Power X1-Hybrid-6.0-LV Inverter displays 'Battery recharge'?
If your SolaX Power Inverter displays 'Battery recharge', check the battery voltage and replenish the power in time.
What should I check if my SolaX Power X1-Hybrid-6.0-LV Inverter displays 'Battery floating charge'?
If your SolaX Power Inverter displays 'Battery floating charge', check battery voltage.
What should I do if my SolaX Power Inverter displays 'BST2 hardware overcurrent'?
If your SolaX Power Inverter displays 'BST2 hardware overcurrent', wait for a while to see if it returns to normal.
What should I do if my SolaX Power X1-Hybrid-6.0-LV displays 'Llc startup failed'?
If your SolaX Power Inverter displays 'Llc startup failed', wait for a while to see if it returns to normal.
What to do if SolaX Power Inverter displays 'Frequency configuration mismatch'?
If your SolaX Power Inverter shows a 'Frequency configuration mismatch', check whether the frequency is within the correct range.
What should I check if my SolaX Power Inverter displays 'Battery voltage is too high'?
If your SolaX Power Inverter displays 'Battery voltage is too high', check whether the battery output voltage is within the normal range.
What to do if my SolaX Power Inverter displays 'PV connection configuration error'?
If your SolaX Power Inverter shows a 'PV connection configuration error', turn off the PV, battery, and power grid. Then, restart the inverter and confirm whether the PV connection is correct.
General| Brand | SolaX Power |
|---|---|
| Model | X1-Hybrid-6.0-LV |
| Category | Inverter |
| Language | English |
Provides critical safety guidelines and warnings to prevent injury, death, and equipment damage during installation and operation.
Details the specifications for the DC input parameters of the inverter, including voltage and current limits for PV modules.
Specifies AC input and output electrical data, including current, power, voltage, frequency, and power factor.
Details the specifications for the Emergency Power Supply (EPS) output, including power, current, and switch time.
Lists battery-related specifications such as battery type, voltage range, nominal voltage, and charging strategy.
Outlines the built-in protection features of the inverter, such as anti-islanding and over-voltage protection.
Highlights important precautions for installing the inverter, including environmental conditions and material restrictions.
Explains how to connect photovoltaic modules to the inverter, including voltage and connection mode requirements.
Details how to connect the inverter to the grid, generator, and EPS load, including breaker requirements.
Covers requirements and steps for connecting low voltage lithium and lead-acid batteries to the inverter.
Defines communication ports and their functions, including COM, BMS, DRM, and parallel connection ports.
Describes how to connect multiple inverters in parallel for increased system capacity, up to 10 units.
Details the mandatory shell grounding connection procedure to prevent electric shock.
Outlines the steps for turning on and starting the inverter after all checks are completed.
Provides a guide to diagnose and resolve common inverter faults and error messages with suggested solutions.
