What should I do if my SolaX Power X1-Hybrid-6.0-LV displays 'Power grid frequency exceeds the allowable value 2'?
If your SolaX Power Inverter displays 'Power grid frequency exceeds the allowable value 2', check whether the grid frequency is within the normal working range.
What should I do if my SolaX Power X1-Hybrid-6.0-LV displays 'Power grid frequency exceeds the allowable value 1'?
If your SolaX Power Inverter displays 'Power grid frequency exceeds the allowable value 1', check whether the grid frequency is within the normal working range.
What should I do if my SolaX Power X1-Hybrid-6.0-LV Inverter displays 'The grid voltage is lower than the allowable value 2'?
If your SolaX Power Inverter displays 'The grid voltage is lower than the allowable value 2', check whether the grid voltage is within the normal working range.
What should I do if my SolaX Power Inverter displays 'The grid voltage is lower than the allowable value 1'?
If your SolaX Power Inverter displays 'The grid voltage is lower than the allowable value 1', check whether the grid voltage is within the normal working range.
What should I do if my SolaX Power X1-Hybrid-6.0-LV displays 'The grid voltage exceeds the allowable value 1'?
If your SolaX Power Inverter displays 'The grid voltage exceeds the allowable value 1', check whether the grid voltage is within the normal working range.
What should I do if my SolaX Power X1-Hybrid-6.0-LV displays 'Inverter frequent overcurrent alarm'?
General| Brand | SolaX Power |
|---|---|
| Model | X1-Hybrid-6.0-LV |
| Category | Inverter |
| Language | English |
Provides critical safety guidelines and warnings to prevent injury, death, and equipment damage during installation and operation.
Details the specifications for the DC input parameters of the inverter, including voltage and current limits for PV modules.
Specifies AC input and output electrical data, including current, power, voltage, frequency, and power factor.
Details the specifications for the Emergency Power Supply (EPS) output, including power, current, and switch time.
Lists battery-related specifications such as battery type, voltage range, nominal voltage, and charging strategy.
Outlines the built-in protection features of the inverter, such as anti-islanding and over-voltage protection.
Highlights important precautions for installing the inverter, including environmental conditions and material restrictions.
Explains how to connect photovoltaic modules to the inverter, including voltage and connection mode requirements.
Details how to connect the inverter to the grid, generator, and EPS load, including breaker requirements.
Covers requirements and steps for connecting low voltage lithium and lead-acid batteries to the inverter.
Defines communication ports and their functions, including COM, BMS, DRM, and parallel connection ports.
Describes how to connect multiple inverters in parallel for increased system capacity, up to 10 units.
Details the mandatory shell grounding connection procedure to prevent electric shock.
Outlines the steps for turning on and starting the inverter after all checks are completed.
Provides a guide to diagnose and resolve common inverter faults and error messages with suggested solutions.
To Next Page
