What should I do if my SolaX Power Inverter displays 'Low soc of grid-connected battery'?
If your SolaX Power Inverter displays 'Low soc of grid-connected battery', stop discharging and start charging.
What should I do if my SolaX Power Inverter displays 'Arc fault'?
If your SolaX Power Inverter is showing an 'Arc fault' message, wait for a while and observe if it returns to normal operation.
What to do if my SolaX Power Inverter displays 'PV connection configuration error'?
If your SolaX Power Inverter shows a 'PV connection configuration error', turn off the PV, battery, and power grid. Then, restart the inverter and confirm whether the PV connection is correct.
What should I do if my SolaX Power X1-Hybrid-6.0-LV displays 'Llc startup failed'?
If your SolaX Power Inverter displays 'Llc startup failed', wait for a while to see if it returns to normal.
What should I do if my SolaX Power X1-Hybrid-6.0-LV Inverter displays 'Low soc of off-grid battery'?
If your SolaX Power Inverter displays 'Low soc of off-grid battery', stop discharging and start charging.
What should I do if my SolaX Power Inverter displays 'BST2 hardware overcurrent'?
If your SolaX Power Inverter displays 'BST2 hardware overcurrent', wait for a while to see if it returns to normal.
What should I do if my SolaX Power Inverter displays 'The grid voltage exceeds the allowable value 2'?
If your SolaX Power Inverter displays 'The grid voltage exceeds the allowable value 2', check whether the grid voltage is within the normal working range.
What should I do if my SolaX Power Inverter displays 'The grid voltage is lower than the allowable value 1'?
If your SolaX Power Inverter displays 'The grid voltage is lower than the allowable value 1', check whether the grid voltage is within the normal working range.
What should I do if my SolaX Power X1-Hybrid-6.0-LV displays 'BST overpower'?
If your SolaX Power Inverter displays 'BST overpower', wait for a while to see if it returns to normal.
What to do if my SolaX Power X1-Hybrid-6.0-LV Inverter displays 'Battery type configuration error'?
If your SolaX Power Inverter displays 'Battery type configuration error', turn off the PV, battery, and power grid, restart the inverter, and confirm whether the battery type is correct.
General| Brand | SolaX Power |
|---|---|
| Model | X1-Hybrid-6.0-LV |
| Category | Inverter |
| Language | English |
To Next Page
