To Next PageTo Next Page
Need help?Do you have a question about the SolaX Power X1-BOOST-3.6K-G4 and is the answer not in the manual?
General| Brand | SolaX Power |
|---|---|
| Model | X1-BOOST-3.6K-G4 |
| Category | Inverter |
| Language | English |
Lists critical safety precautions for inverter operation and maintenance.
Provides detailed specifications for the inverter's DC input parameters.
Provides detailed specifications for the inverter's AC output parameters.
Lists the safety and protection features integrated into the inverter.
Important considerations and site requirements before installing the inverter.
Step-by-step guide for the physical installation of the inverter.
Details on how to connect the inverter to power sources and the grid.
Connects PV modules to the inverter for power generation.
Connects the inverter to the public power grid.
Details the proper grounding procedure for the inverter.
Guidance on selecting appropriate fuses and cables for the system.
Setup for RS485 communication via COM/CT port.
Procedures for connecting meters with or without CTs.
Diagram, pin definitions, and steps for CT connection.
Introduces system configuration for multiple inverters in parallel.
Diagram illustrating parallel setup using Modbus communication.
Diagram illustrating parallel setup using Datahub.
Steps to set up a parallel system using Modbus.
Steps to configure the master inverter in a parallel system.
Steps to configure slave inverters in a parallel system.
Procedures for updating the inverter's firmware to the latest version.
Steps to check and start the inverter after installation.
Steps for initial setup, region settings, and grid protection.
Describes navigating through the LCD menus for settings and monitoring.
Controls the amount of energy exported to the grid based on user settings.
Configuring safety parameters for grid connection according to local codes.
Procedures and tips for diagnosing and resolving inverter problems.
