8 Decommissioning
8.1 Dismantling the Inverter
Disconnect the inverter from DC Input and AC output.
Wait for 5 minutes for de-energizing.
Disconnect communication and optional connection wirings.
Remove the inverter from the bracket.
Remove the bracket if necessary.
If possible, please pack the inverter with the original packaging.
If it is no longer available, you can also use an equivalent carton that meets the
following requirements.
Suitable for loads more than 30 kg.
With handle.
Can be fully closed.
8.3 Storage and Transportation
Store the inverter in dry place where ambient temperatures are always between
-25 °C - +60 °C. Take care of the inverter during the storage and transportation,
keep less than 4 cartons in one stack.
8.2 Packaging
When the inverter or other related components need to be disposed. Have it
carried out according to local waste handling regulations. Please be sure to
deliver wasted inverters and packing materials to certain site, which can assist
relevant department to dispose and recycle.
40
Decommissioning
WARNING!
Before dismantling the inverter, please be sure to
disconnect the DC switch, and then unplug the PV and AC
cables, otherwise it will lead to an electric shock hazard.
To Previous Page
Loading...
Need help?
General
