7.2.6 Why does the power of my new battery seem weak?
Deep-cycle battery use a unique chemical technology and design. It can be charged quickly and can be used
for a long time after it has been fully charged. The battery is fully charged when it leaves the factory but
may change its initial charge during transportation. The battery will lose power in high temperatures and it
will extend the held charge in low temperatures.
The battery needs a few days to adapt to the surrounding environment before performs consistently. More
importantly, deep-cycle batteries require several charging cycles (full charge and large discharge) before
they will perform at maximum capacity.
Please follow these steps to improve the battery performance
1. Fully charge the battery before first use
2. Use a low speed setting for the first use and do not travel too far until you are familiar with the operation of your
scooter.
3.
Try to use as much battery as possible, before giving it a second full charge. This will make the battery operate at
up to 90% capacity.
4. The battery capacity will reach 100% after four to five charging and discharging cycles as outlined above.
7.2.7 How to ensure the battery life?
A fully charged battery will provide a good performance and battery life, so keep the battery fully
charged whenever possible. Your battery performance and battery life will suffer if you
Let your battery get flat
Do not charge the battery regularly
Do not fully charge the battery.
To Next Page
Loading...
