Solaxx Resilience E Series - Cold Water Error Troubleshooting; Water Temperature Below Threshold; Temperature Sensor Failure

Possible Causes What to do
Water temperature is below 68
°
F/ 20
°
c
Manually check the water temperature. If water temp. is below
68
°
F system is OK. If water temp. is higher than 68
°
F then temp.
sensor had failed
Temperature sensor failed Replace cartridge. Refer to relevant Youtube video
COLD WATERCOLD WATER
LED Turns On when:
Measured Water temperature is below 68
°
F –
When below 68
°
F/ 20
°
c - max. chlorine output level – 50%
When below 59
°
F/ 15
°
c - max. chlorine output level – 25%
7