Output Section
The Output Section adds additional harmonic saturation with the modelled dbx 202
‘gold can’ VCA fader from the 4000 E console - the FADER LEVEL parameter.
This fader controls the output signal of the plug-in and can be driven up to +12 dB to
add another colour of harmonic distortion, with an additional 'clean' output trim to
compensate for additional gain added at this stage.
The WIDTH & PAN controls (only for plug-in instances with a stereo output) allows
for additional mid-side (M/S) width control & panning of the signal. These two
options are greyed out when the plug-in is instanced on a mono channel.
*The controls are available in stereo or mono-to-stereo operation only. When the
plug-in output is mono, WIDTH & PAN controls will be greyed out.
**When using the VST3 format in Live, Studio One or REAPER, the SOLO & CUT
are automatically linked to the DAW’s solo and cut controls.
To Next Page
Loading...
