Need help?Do you have a question about the Solid State Logic Fusion and is the answer not in the manual?
General| Channels | Stereo |
|---|---|
| USB | No |
| Bypass | Yes |
| Maximum Output Level | +26dBu |
| Power Consumption | 30W |
| Other Processing | Vintage Drive, Stereo Image |
| Analog Inputs | 2 x XLR |
| Analog Outputs | 2 x XLR |
| Form Factor | Rackmount |
| Frequency Response | 20Hz - 20kHz |
| Input Impedance | 10k Ohms |
| Power Supply | Internal |
| Noise | -90dBu (unweighted) |
| Output Impedance | 50 Ohms |
Details and labels for all controls and indicators on the front of the Fusion unit.
Details and labels for all connectors, switches, and indicators on the rear of the unit.
Illustrates connecting the Fusion unit to an audio interface for studio integration.
Steps for integrating Fusion into a DAW as a hardware insert for processing.
Guide on connecting Fusion to an analogue desk or summing mixer for enhanced processing.
Detailed description of the Input Trim control and its gain adjustment capabilities.
Detailed explanation of the Vintage Drive saturation circuit, its controls, and sonic characteristics.
Detailed explanation of the Violet EQ, its bands, frequencies, gain range, and sonic properties.
Instructions for resetting the unit to its original factory default settings.
Details on warranty claims, conditions, and return procedures for the Fusion unit.
Essential safety instructions for operating and maintaining the Fusion unit.
Guidelines for safe and proper rack mounting and placement of the Fusion unit.
Instructions related to power connections, earthing, and mains voltage safety.
Step-by-step guide for changing the fuse to operate the unit from a 230V power source.
Step-by-step guide for changing the fuse to operate the unit from a 115V power source.
To Next Page
