Need help?Do you have a question about the Solid State Logic ORIGIN and is the answer not in the manual?
General| Channels | 32 |
|---|---|
| Aux Sends | 8 aux sends |
| Type | Analog Recording Console |
| Faders | 100mm motorized faders |
| EQ | 4-band EQ with variable frequency |
| Dynamics | Compressor/Limiter on each channel |
| Monitoring | Stereo monitoring with multiple source selection |
| Digital Connectivity | Dante, MADI, Pro Tools HD |
| Metering | LED meters on all channels and master |
| Connectivity | XLR, TRS |
| Master Section | Comprehensive master section with control for all outputs |
| A-D Conversion | 24-bit |
Important safety information and warnings to read before using the console.
Details the wide gain range, ultra low noise SuperAnalogue design for Line and Mic level amplification with PureDrive™ feature.
Adjusts pre-amp gain, line amp gain, and alters pre-amp character with harmonic distortion.
Fully balanced output for sending selected path signal directly out, post or pre-fader.
Features an 18 dB/Octave HPF and a four-band Parametric EQ based on SSL's classic 'Black Knob' EQ.
Explains routing signals from channel paths (LF/SF) to the 16 track buses.
Details the traditional method of routing from a channel strip's ROUTE switch to buses.
Centre console section for selecting track buses to assign signals to.
Describes the alternative routing method starting from the bus selection.
Details the 60mm SF fader, SF PAN, SF FROM LF, 0dB bypass, and SF TO MIX functions.
Details the 100mm LF fader, LF PAN, LF TO MIX, and 0dB bypass.
Introduction to the Master Section, highlighting Bus Masters, Compressors, and Communication hubs.
Covers Monitor Levels, Source Selection, Speaker Selection, and CUE/AUX Master controls.
Details Bus Trims, Routing, Stereo Returns, Mix Bus Fader, Insert, and Compressor.
Includes Talkback/Listen Mic, Communications, Oscillator, Misc (Auto Sleep), and SHIFT functions.
Explains the sixteen track buses, their connection to Stereo Groups, and the Route Switches and LEDs.
Describes the control room monitor system supporting multiple monitors and headphones.
Master MONITOR LEVEL control with MUTE, DIM, MONO, and trim controls for alternate monitors.
100mm stereo MIX BUS fader for main Mix Bus Out level control.
Dedicated, fully balanced Insert Send and Return for external mix bus processing.
Stereo compressor based on SL4000 G-Series, with Threshold, Ratio, Attack, Release, and Makeup controls.
Tools to manage power requirements, including WAKE/SLEEP and AUTO SLEEP functions.
Setup for AUTO SLEEP timeout using Bus Routing keys and LEDs.
Steps to restore the console to its default settings and conditions.
Steps to perform a factory reset using specific button combinations during power-up.
Detailed performance specifications for the PureDrive™ Channel Input Pre-Amp.
To Next Page
