Solid State Logic ORIGIN User Manual

ORIGIN User Guide
Appendix B
40
Factory Setup Reset
Factory reset is provided to restore the console to its default settings and conditions.
Factory reset affects:
- Routing (all routes cleared)
- Comms settings (Monitor Dim assignments, Talk All assignments)
- Autosleep state
- Any Setting
- Monitor and Source Selection
To perform a Factory Reset:
Power up the console (either from off or from Sleep state)
Press and hold PEAK MODE SELECT + DIM MON METERS switches during and for the duration of the meter start-up sequence
which happens during power up.
Red Peak LEDs on every meter will start ashing which means that the Factory Reset has been performed.
Release the switches -> console restarts with settings back to Factory Default.

Solid State Logic ORIGIN Specifications

General

Brand	Solid State Logic
Model	ORIGIN
Category	Recording Equipment
Language	English