Solid State Logic THE BUS+ User Manual

Appendices
40
THE BUS+ User Guide
Industry Canada Compliance
• This Class A digital apparatus complies with Canadian ICES-003.
• Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Electromagnetic Compatibility
EN 55032:2015+A11:2020, Class A.
EN 55103-2:2009, Environments E1 - E4.
FCC 47CFR Part 15, Sub Part B.
ICES-003:2016.
Initial average half-cycle inrush current: <6.0 A. Typical Peak inrush current: <10.0 A.
WARNING: Operation of this equipment in a residential environment could cause radio interference.
The audio input/output ports are screened cable ports and any connections to them should be made using braid-screened cable
and metal connector shells in order to provide a low impedance connection between the cable screen and the console.
Safety
EN IEC 62368-1:2020+A11:2020.
BS EN IEC 62368-1:2020+A11:2020.
UL 62368-1, 3rd Ed. 2019.
CAN/CSA C22.2 No. 62368-1:19, 3rd Edition
This equipment is not suitable for use in locations where children are likely to be present.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Environmental
Temperature: Operating: +1 to 30 degrees Celsius. Storage: -20 to 50 degrees Celsius.
Further information
For additional information, product downloads, knowledge base and technical support visit the www.solidstatelogic.com.

Solid State Logic THE BUS+ Specifications

General

Brand	Solid State Logic
Model	THE BUS+
Category	Recording Equipment
Language	English