SOLID STATE SECURITIES SS90 User Manual

SS90-WPS MODEL A/B INSTALLATION MANUAL
GENERAL DESCRIPTION: S/N____________________
The Solid State Securities “SS90" World Power Series Time Delay Release Devices are designed for use on rolling doors,
single-slide and center parting level and inclined track doors. All models are normally energized Fail-Safe Releasing
Devices incorporating state of the art electronic control circuitry. The "SS90" Series Release Devices respond to emergency
conditions generated by manual or automatic normally closed initiating devices and shall be used in conjunction with a
temperature fuse link system.
The "SS90" Series Release Device *features include; world power source capability allowing the same unit to be used on
24VDC, 24VAC or 120VAC 50 or 60HZ., separate adjustable time delays for alarm and power loss, motor voltage sensing,
form-C relay output, proximity/door edge input and trouble diagnostic capabilities. Models A and B can be wired for two
or four wire configuration. *Check model label on unit to be installed to verify applicable features.
CAUTION: Review all installation instructions, procedures, cautions and warnings contained within this manual
prior to installing and/or servicing this product. As with all releasing device systems, maximum fire protection is
provided when installed in accordance with factory specifications and used with fuse link systems.
Fail-safe operation can only be provided with input power applied. DO NOT install this unit without fuse links.
TEST SYSTEM AT LEAST ONCE EVERY 90 DAYS TO ASSURE PROPER OPERATION.
Installation and testing to factory specifications shall be performed by factory authorized personnel for
proper operation in accordance with all of the latest National Fire Protection Association (NFPA),
Underwriters Laboratories (UL), National Electrical Code (NEC), local, state, county, district and/or other
applicable building and fire standards, guidelines, regulations and codes including, but not limited to, all
appendices and amendments and the requirements of the local authority having jurisdiction (AHJ).
TECHNICAL SUPPORT (570) 455-0577 © 1999 SSSI, PATENTS PENDING ALL RIGHTSRESERVED
HAZLETON, PENNA 18201 P/N: REV1.a
1
*
P
A
T
E
N
T
P
E
N
D
I
N
G
S
S
S
S
S
S
O
L
ID
T
A
T
E
E
C
U
R
I
T
I
E
S
,
I
N
C
S
S
90
S
O
L
I
D
S
T
A
T
E
F
A
I
L
-
S
A
F
E
U
N
I
T
L
I
S
T
E
D
9
9
Y
9
R
E
L
E
A
S
I
N
G
D
E
V
I
C
E
U
L
R
E
S
E
T
THE "SS90" SERIES
RELEASE DEVICES
SOLID STATE SECURITIES, INC.
MADE IN THE U.S.A.
http://www.sssiusa.com - E-Mail: ss90@sssiusa.com

SOLID STATE SECURITIES SS90 Specifications

General

Brand	SOLID STATE SECURITIES
Model	SS90
Category	Security System
Language	English

Summary

GENERAL DESCRIPTION

INSTALLATION INSTRUCTIONS

MOUNTING PROCEDURE

Details the steps for physically mounting the release device enclosure and hardware.

Smoke Detectors

Guidance on installing smoke detectors with the release device, referencing NFPA and UL standards.

ELECTRICAL CONNECTIONS

Instructions for wiring and connecting the release device, adhering to safety standards.

ELECTRICAL AND MECHANICAL CHARACTERISTICS

OPERATING VOLTAGES

Specifies the voltage ranges the SS90 release devices can operate with.

CURRENT REQUIREMENTS

Details the current draw for the release devices across different operating voltages.

INITITIATING LOOPS

Defines requirements and limitations for initiating device loops, including resistance and current.

FORM C OUTPUT

Provides the maximum contact rating for the Form C output of the release device.

FUSE RATINGS

Lists the types and ratings of fuses used within the SS90 release device and its PC boards.

DIMENSIONS

Specifies the physical dimensions of the SS90 release device unit.

FOUR WIRE- INDEPENDENT ALARM & POWER LOSS DELAYS

TWO WIRE/SINGLE DELAY

TEST PROCEDURES

Electronic Testing

Procedure for electronically testing Model SS90-A-WPS using the test button.

Close Limit Testing

Procedure for testing Model SS90-B-WPS with the Close Limit option.

Power Loss Test

Procedure for testing the device's reaction to a simulated power loss.

MAINTENANCE REQUIREMENTS

TROUBLESHOOTING GUIDE

SYMPTOM ANALYSIS

Guides users through identifying symptoms and finding possible causes for device malfunctions.

NOTES/TEST RECORDS