EasyManua.ls Logo

SolidRF MobileForce - Step-By-Step Installation Guide; Step 1: Vehicle Planning

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Step1: Study your vehicle and make a installation planning
In order to achieve the best signal coverage effect, there is a certain distance
requirement between the inside antenna and outside antenna. Make sure that the
outside antenna is horizontally attached to the roof and the inside antenna is parallel to
the horizontal plane.
First determine the location of the inside antenna. It should be the place you use your
cell phone signal most of the time.
5
NOTE: It is suggested that the inside antenna should be placed at the lower side of the
driver's seat, so as to maximize the distance from the outside antenna. Be sure it’s in a
location that the cable can reach.
≥3 feet
≥2 feet

Related product manuals