SolidRF BuildingForce 4G-X - User Manual

SolidRF BuildingForce 4G-X
Cell Phone Booster Manual
If you have any questions or concerns when
installing or operating your cell phone booster,
please email us:
Support@SolidRF.ca
Please provide the invoice of your product in
your email. Or visit www.SolidRF.ca for more
information.
Systems tested and certified against FCC
standard, Equipment Class: Part 20 Wideband
Consumer Booster (CMRS)
Systems tested and certified against IC standard,
Type of Equipment: Amplifier, RSS-131
Manufactured and Warranted by
SolidRF Technology Inc. Canada
www.SolidRF.ca
IC
Product Diagram
Package Contents
Features
Test Installation
Installation – Step By Step
Technical Specification
Troubleshooting
Find Strongest Signal
Self Oscillation

Summary

Product Diagram

Package Contents

Features

Test Installation

Find a cell tower nearby

Guidance on locating cell towers using online resources and recommended third-party websites and apps.

Installation - Step By Step

How does it works

Explains the basic functionality of the cell phone booster, from capturing signals to rebroadcasting.

Step 1: Mount the outside antenna

Instructions for selecting the optimal position and mounting the external antenna, considering separation distances.

Conduct a Test Installation

Emphasizes performing a test installation to ensure optimal system setup before permanent mounting.

Step 2: Mount the inside antenna

Guidance on positioning and mounting the internal antenna for effective signal distribution within the building.

Step 3: Arrange the booster

Recommendations for placing the booster unit, emphasizing heat sources, ventilation, and temperature ranges.

Step 4: Power on the booster

Steps for connecting the power adapter and safely powering on the cell phone booster unit.

Technical Specification

ATTENTION: Self Oscillation

What is Self Oscillation

Explains the phenomenon of self oscillation, where antennas pick up each other's signals, causing feedback.

How to correct Self Oscillation

Provides methods to resolve self oscillation, primarily by increasing antenna separation distance and avoiding direct facing.

Why is it so important to prevent Self Oscillation

Details the importance of preventing self oscillation due to potential interference with cellular networks and FCC regulations.

Troubleshooting

Correct functioning

Describes the expected indicator lights and conditions when the booster is operating correctly after power-on.

Incorrect functioning

Identifies issues like flashing lights indicating self oscillation and advises on troubleshooting steps.

Find Strongest Signal

Use Cell Phone Only

Methods for checking signal strength using cell phone display and numerical values, including specific dial codes.

Use Cell Phone During Test Installation

Process for a two-person approach to adjust the antenna and read signal strength for optimal booster performance.

SolidRF BuildingForce 4G-X Specifications

General

Model	BuildingForce 4G-X
Brand	SolidRF
Cellular Technology	4G LTE
Uplink Frequency Range	698-716 / 776-787 / 824-849 / 1710-1755 / 1850-1915 MHz
Maximum Gain	72 dB
I/O Port	N-Female
Impedance	50 Ohm
Antenna Connectors	N-Female
Downlink Frequency Range	728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 MHz
Power Supply	AC 120V, 60Hz to DC 12V/3A