SolidRF SOHO Dual Bands User Manual

SolidRF SOHO Dual Bands Cell
Phone Signal Booster for GSM,
GPRS, CDMA 3G and 4G LTE
850 MHz (Band 5) / 1900 MHz
(Band 2) ONLY
If you have any questions or concerns
when installing or operating your cell
phone booster, please email us:
Support@SolidRF.ca
Please provide the invoice of your
product in your email. Or visit
www.SolidRF.ca for more information.
Systems tested and certified against FCC
standard, Equipment Class: Part 20
Wideband Consumer Booster (CMRS)
Systems tested and certified against IC
standard, Type of Equipment: Amplifier,
RSS-131
Manufactured and Warranted by
SolidRF Technology Inc. Canada
www.SolidRF.ca
Check Cellular Band
ATTENTION: IT MUST BE READ FIRST
Test Installation
Quick Installation
Technical Specification
Troubleshooting
Self Oscillation
!
Product Diagram, Package Contents
Installation Step By Step

SolidRF SOHO Dual Bands Specifications

General

Maximum Gain	65 dB
Uplink Frequency	698-716 MHz / 776-787 MHz / 824-849 MHz / 1850-1915 MHz / 1710-1755 MHz
Downlink Frequency	728-746 MHz / 746-757 MHz / 869-894 MHz / 1930-1995 MHz / 2110-2155 MHz
Ports	SMA female
Antenna	External

Summary

Check Cellular Band

Test Installation

Quick Installation Guide

Finding the Strongest Signal

Instructions on how to use your cell phone to locate the area with the best signal.

Exterior Antenna Installation

Guidance on mounting the exterior antenna on a wall or roof for optimal reception.

Connecting to Inside Unit

Steps to connect the coax cable from the exterior antenna to the inside unit.

Setting Up the Inside Unit

Guidelines for placing the inside unit to maintain proper antenna separation.

Antenna Installation Guidelines

Recommended Antenna Placement

Diagrams and advice for optimal placement and separation of antennas.

Prohibited Antenna Placement

Illustrations showing incorrect antenna placement and common mistakes to avoid.

Troubleshooting Guide

Initial Startup Indicators

Error Conditions and Symptoms

Details common error conditions, their symptoms, possible causes, and suggested corrections.

Self Oscillation Prevention

Understanding Self Oscillation

Explanation of self-oscillation and its detection by the booster.

Correcting Self Oscillation

Importance of Preventing Self Oscillation

Step-by-Step Installation

Mounting the Outside Unit

Technical Specification

Frequency and Gain

Output Power and Noise Figure