SolidRF MobileForce - Step 4: Installing the Inside Antenna; Step 5: Connecting the Booster System

8
There are 2 powerful celcro at the bottom of the inside antenna, which can attract the
antenna to the side of seat.
Step4: Indside Antenna Installation
Step5: Connect the System
1. Connect the outside antenna cable to
the booster at the “OUTSIDE” port.
2. Connect the intside antenna cable to
the booster at the “INSIDE” port.
3. Plug in the power adaptor and connect it to the nearest power outlet.
Note: Make sure that the inside antenna is parallel to the
horizontal plane