SolidRF Signal Plus - Evaluate Booster Performance; Decibel Gain vs. Performance Metrics

Step5: Evaluate the Effects
Test Record
Decibel Gain vs. Power Amplification/Distance/Coverage area
Decibel Gain
Power Amplification
(times)
Distance Enhance
(times)
Coverage Enhance
(times)
6
4
2
4
10
10
3
9
20
100
8
64
30
1000
32
900
Note: Decibel Gain and Power Amplification may vary depending on the specifics of your
situation. Different building materials and other obstructions in your home will result in
different outcomes.
No
Location
Record(dBm)
1
2
3
4
13
• Now that the booster is up-and-running, re-test the signal strength inside your home
at the same locations from Step 1. If the number is higher (dBm reading is closer to
zero) than the original reading, your booster is working.
• If your signal is not stronger, check the LED lights on the booster and refer to the
“Quick Troubleshooting” section at the end of the manual.