EasyManua.ls Logo

SolidRF SR14652002A - Minimum separation distances for indoor antennas; Indoor antenna separation distances

SolidRF SR14652002A
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
componentsoftheequipment.Theinsideunitisdesignedforuseinanindoor,temperature‐controlled
environment(lessthan100degreesFahrenheit).Itisnotintendedforuseinatticsorsimilarlocations
wheretemperaturesmaybeinexcessofthatrange.
RFSafetyWarning:Anyantennausedwiththisdevicemustbelocatedatleast8inchesfromallpersons.


CPC‐2‐1‐05—ZoneEnhancers‐Spectrummanagementandtelecommunications
http://www.ic.gc.ca/eic/site/smt‐gst.nsf/eng/sf08942.html
Mobilephoneistheminimumdistancetouseindoorantenna
Insideserverantennatypes MinimumseparationdistancesD(m)
Ceilingmounted(e.g.,dome‐type)antennas 2
Wallmounted(i.e.,panelorothertype)
antennas
1.0or2*
Tabletopantennas 1.0

Related product manuals