SolidRF SR14652002A - Test Installation; Step 1: Select Location for Outside Unit

Step1:SelecttheLocationfortheOutsideUnit
Note:Thisisthemostcriticalstepandwilldeterminetheoverallperformanceofthe
boostersystem.
1. Generally, the strongest signal will be located on the side of your home facing the
nearestcelltower.Keepinmind,thesignalstrengthatgroundlevelmaybe
differentfromthesignalstrengthatorabovetherooflineduetoobstructions
(trees,otherbuildings,etc.)thatblocktheincomingsignal.Inmostsituations,the
strongestsignalisfoundabout25feetabovethegroundonthesideofyourhome
facingthenearestcelltower.
2. Themostidealinstallationpositionisthecornerofthebuilding,choosetheone
facingyourcelltower.
8
Fourcornerofthebuildingarethemostidealposition
Choosetheonefacingyourcelltower
TestInstallation
WeSTRONGLYrecommenddoingatestinstallationbeforefinalizingtheinstallation.
Doingatestinstallationofyourcellphoneboosterensuresthatyouwillgetthe
optimalperformancefromyoursystem.

