SOLINTEG M Series - PV Side Requirements; Photovoltaic Cable Selection

51
User Manual
MHT-25~50K series
5.6.1 PV Side Requirements
System Layout of Units with external DC Switch
①

the DC side. The DC switch must be able to safely disconnect the open-circuit voltage of


②

Australia and New Zealand market. The Max. current of the DC switch matching with MHT-

Figure 5-29
Select the appropriate photovoltaic cable
Cable requirements
Cable stripping length
Outside diameter Conductor core section
 4 mm² 7 mm
tch




To grounding electrode

+
++
AC Breaker
 



+
+
+ + +
5.6.2 Assembling the PV Connector
Before assembling the DC connector, make sure that the cable polarity is
correct.
WARNING