Need help?Do you have a question about the SOLIS 20 and is the answer not in the manual?
Provides contact details for the ITL Service Department for assistance.
Lists the components included in the tractor's tool kit.
Lists the components included in the tractor's farmer kit.
Mentions how to avail tractor services and dealer support.
Lists additional accessories provided as standard fitment.
Explains the DANGER symbol indicating immediate hazardous situations.
Explains the WARNING symbol for potentially dangerous situations.
Explains the CAUTION symbol for potentially minor hazardous situations.
Essential checks and instructions to follow before operating the tractor.
Provides guidance for safe and careful tractor driving.
Steps and warnings to prevent the tractor from tipping over.
Instructions for safely parking the tractor after use.
Guidelines regarding the safety of passengers on the tractor.
Safety measures for refueling and preventing fires.
Warning about the danger of rotating shafts and PTO entanglement.
Guidelines for performing maintenance safely and correctly.
Warning about high-pressure fluids and severe injury risks.
Precautions to prevent battery explosions from sparks or flames.
Safety advice for mechanics and operators when servicing the tractor.
Precautions to prevent severe burns from battery electrolyte (sulfuric acid).
Importance of proper ventilation to avoid sickness or death from exhaust fumes.
Warning about tractor runaway and how to prevent it, plus safety starter switch.
Explains the origin of the word 'Tractor' and its purpose in agriculture.
Describes the tractor's instrument panel, gauges, and indicators.
Explains the function and operation of various electrical controls and switches.
Explains the engine oil pressure indicator and actions for low pressure.
Explains the fuel gauge, its indication, and minimum fuel requirement.
Details the battery charge indicator and its interpretation for system health.
Explains when the high beam indicator light illuminates.
Describes the function of the left side indicator light.
Describes the PTO lever positions for obtaining three different speeds.
Explains the gear lever positions for selecting desired gear speeds.
Explains the purpose and operation of the hazard light switch.
Describes using the side indicator switch for vehicle turn signals.
Explains the combination switch for lights and its function as a horn switch.
Explains how to use the engine stop knob to turn off the engine.
Describes the location and function of the fuse box for electrical protection.
Explains the use of the revolving light switch for field operation.
Instructions for checking and maintaining the tractor battery.
Details the alternator's function in charging the battery.
Procedures for checking V-belt tension and making adjustments.
Describes the starter motor's role in starting the engine.
Safety precautions to take before connecting welding equipment to the tractor.
Information related to the tractor's sheet metal parts.
Step-by-step instructions for opening the tractor's top hood.
Explains the main gear shifter lever for selecting forward and reverse speeds.
Describes the high-low lever for changing between high and low speed ranges.
Explains the 2WD/4WD lever for selecting drive modes.
Explains the differential lock pedal and its correct usage.
Describes the function of the clutch pedal in disengaging power.
Procedure to check and adjust the clutch pedal's free play.
Explains the independent use of foot brake pedals for field operations.
Procedure to check and adjust the tractor's brakes for proper function.
Describes the use of the foot accelerator for controlling tractor speed.
Explains the hand throttle lever for adjusting engine speed in the field.
Mentions that the driver seat can be adjusted for convenience.
Details how to adjust the seat pan forward and backward.
Explains how to adjust the seat back up or down.
Describes the location of the tool box and how to open it.
Describes the position control lever for raising or lowering implements.
Details the PTO system, its shaft, and speed engagement.
Mentions the location of the vehicle registration plate.
Describes the vehicle's equipped front and rear tail lights.
Instructions for starting the engine in cold weather conditions.
Procedure for safely turning off the tractor engine.
Details about the tractor's fuel system and its components.
Tips for saving fuel and maintaining the fuel system for efficiency.
Explains the transport lock mechanism for safely securing implements.
Details the three-point linkage system for attaching agricultural implements.
Describes the lift rods (A & B) of the three-point linkage.
Explains the top link (C) and how to adjust its length.
Describes the function of the lower links for hitching implements.
Step-by-step procedure for attaching implements to the three-point linkage.
Explains the directional control valve and how it operates the hydraulic cylinder.
Recommended tyre pressure for optimal performance during in-field operations.
Recommended tyre pressure for safe and efficient operation on roads.
Table showing recommended load carrying capacity for different tyre sizes.
Importance of adjusting the front wheel toe-in for proper alignment.
Procedure to check and adjust the front wheel toe-in alignment.
Common tyre problems and their corresponding corrective actions.
General tips for maintaining tractor tyres and preventing damage.
Procedure to check the tightness of wheel nut bolts on front and rear wheels.
Maintenance procedures related to the tractor engine.
Details on the engine lubrication system, recommended oil grade.
Step-by-step procedure for checking the engine oil level.
Instructions for changing the engine oil and oil filter.
Steps for bleeding air from the fuel injection system after filter replacement.
Information about the tractor's air cleaner system.
Details on the maintenance of the oil bath type air cleaner.
Procedure for cleaning the dry pre-cleaner element.
Maintenance tasks to be performed every 50 operating hours.
Procedure to check coolant level safely when the engine is hot.
Steps for draining and flushing the radiator system when cold.
Instructions for cleaning the radiator fins to ensure airflow.
Explains the importance of the radiator cap for system pressure.
How to check the transmission and hydraulic oil levels.
Steps for changing the transmission oil.
Procedure for changing the oil in the steering gear box.
How to check the oil level in the front axle.
Detailed technical specifications for the tractor's engine.
Performance metrics related to the tractor's Power Take Off (PTO).
Performance metrics related to the tractor's drawbar.
Specifications of implements used during field testing.
Tractor weight details with and without various ballasting conditions.
Lists the accessories that are supplied with the tractor.
Table showing nominal tractor speeds for different gears.
Do's and Don'ts specific to the engine and its systems.
Do's and Don'ts related to the clutch pedal and its operation.
Do's and Don'ts for the hydraulic system and implement linkage.
Do's and Don'ts for the tractor's braking system.
Do's and Don'ts for the front axle and steering mechanism.
Do's and Don'ts concerning tractor tyres and their maintenance.
Tips and practices to improve fuel efficiency and save diesel.
General advice for ensuring better overall tractor performance.
Safety recommendations for operating the tractor.
Identifies common engine problems and their potential remedies.
Identifies common hydraulic system problems and their potential remedies.
Identifies common brake system problems and their potential remedies.
Identifies common electrical system problems and their potential remedies.
Specifications for implements like Rotavator, Cultivator, and Harrow.
Details and specifications for the cultivator implement.
Safety precautions to follow when operating the rotary tiller.
Steps for assembling the rotary tiller implement.
Method for levelling the ground using the rotavtor blades.
Method for creating ridges in soil using the rotavtor blades.
Method for ridging soil using the rotavtor blades.
Instructions for mounting the optional ridger attachment.
Precautions to follow when operating the tractor with the tiller attached.
Describes successive and alternate tilling methods for soil cultivation.
Details the constant ridging method for soil cultivation.
To Next Page
General
