Solo 140 User Manual

1
9 134 110 00 02/02
Gebrauchsanweisung Motorsense
Instruction manual Brushcutter
Instructions d'emploi Débroussailleuse
Manual del usario Motosegadora
Istruzioni d'impiego Decespugliatore
130 / 134 / 140
Achtung: Lesen Sie vor der ersten Inbetriebnahme diese
Gebrauchsanweisung gründlich durch und beachten Sie
unbedingt die Sicherheitsvorschriften!
Important: Read this instruction manual carefully before first
operation and strictly observe the safety regulations!
Attention: Lire attentivement ce manuel avant la première mise
en service et observer absolument les prescriptions de sécurité!
Atención: Es indispensable leer con mucha atención las
instrcciones de manejo antes de utilizar por primera vez. ¡ Preste
especial atención a las recomendaciones de seguridad!
Attenzione: Leggete con attenzione queste Istruzioni prima
della messa in funzione. Rispettate sempre le istruzioni e i
consigli per la Vostra sicurezza!

Solo 140 Specifications

General

Engine Type	2-stroke
Fuel Tank Capacity	0.7 l
Displacement	40.2 cm³
Shaft Type	Straight shaft
Vibration Level	4.5 m/s²

Summary

Instruction Manual Overview

General Safety Advice

Multilingual safety warnings for initial operation and general precautions.

Manual Introduction

Symbols Guide

Explains various safety and operational symbols used in the manual.

Assembly and Safety Notes

General Safety Instructions

Comprehensive safety advice covering work practices, user responsibility, and prohibited actions.

Operational Safety and Usage

Personal Protective Equipment

Details on essential protective clothing and gear for safe operation.

Operating Instructions

Engine Maintenance

Carburetor Setting

Procedure for adjusting carburetor settings for optimal performance.

Air Filter Maintenance

Mechanical Maintenance and Transport

Storage and Fueling Procedures

Fueling Instructions

Detailed guidance on fuel mixture, handling, and safety during refueling.

Installation and Attachment Procedures

Handlebar Installation and Adjustment

Shield Installation and Setting

Attaching Cutting Tools

Procedure for installing various cutting attachments and blades.

Attachment Handling and Straps

String Head Operations

Engine Operation Guide

Preparing to Start Engine

Pre-start checks and safety precautions.

Engine Starting Procedures

Detailed steps for cold and warm engine starting.

Shutting Off Engine

Specifications and Service Schedule

Service Schedule