SOMFY J4 WT Protect - ASSEMBLY: 58;57 MM HEAD RAIL (OPEN BOTTOM)

17/30
J4 WT Protect Drive
Full installation guide
[ Click here to return to contents ]
Copyright © 2017 SOMFY ACTIVITES SA. All rights reserved.
Non contractual images.
→ 58MM X 56MM HEAD RAIL, OPEN AT THE BOTTOM
& 57MM X 51MM HEAD RAIL, OPEN AT THE BOTTOM
Using the clips
5
, fix the drive in the
head rail on top of the acoustic strips.
4
2
Connect the power cable
3
to
the drive.
Ensure that the cable does not
hinder any rotating part of the
drive or mechanism.
Screw the 2 adaptors to the drive
sha
1
using two M3x8 screws
2
.
Tightening torque = 1.35 N.m ± 20%
1
Insert the drive in the head rail
4
.
3
The sha of the EVB can be fixed in
the adaptor using a grub screw
6
.
Tightening torque = 2 N.m maximum
5
6
6
5
5
4
3
21
12