SOMFY J4 WT Protect - ASSEMBLY: 67 MM HEAD RAIL (OPEN BOTTOM)

22/30
J4 WT Protect Drive
Full installation guide
[ Click here to return to contents ]
Copyright © 2017 SOMFY ACTIVITES SA. All rights reserved.
Non contractual images.
→ 67MM X 66MM HEAD RAIL, OPEN AT THE BOTTOM
2
Connect the power cable
3
to
the drive.
Ensure that the cable does not
hinder any rotating part of the
drive or mechanism.
Screw the 2 adaptors to the drive
sha
1
using two M3x8 screws
2
.
Tightening torque = 1.35 N.m ± 20%
1
21
12
3
Insert the drive in the head rail
4
.
4
Fit the two head rail adaptors
7
onto
the drive.
3
Using the clips
5
, fix the drive in the
head rail.
5
6
The sha of the EVB can be fixed in
the adaptor using a grub screw
6
.
Tightening torque = 2 N.m maximum
7
7
4
5
5
6
6