EasyManua.ls Logo

SOMFY LV25 - Field of Application

SOMFY LV25
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Copyright © 2010-2016 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
EN
2
SOMFY ACTIVITES SA, Société Anonymes, F-74300 CLUSES as manufacturer hereby declares that the
drive covered by these instructions and used as intended according to these instructions is in compliance
with the essential requirements of the applicable European Directives and in particular of the Machinery
Directive 2006/42/EC, and the EMC Directive 2014/30/EU.
The full text of the EU declaration of conformity is available at www.somfy.com/ce.
Christian REY, Approval manager, acting on behalf of Activity director, Cluses, 05/2016
These instructions apply to all LV25, LW25 and LW25E drive, the different versions of which are
available in the current catalogue.
Field of application
C25 drive are designed to drive all types of interior roman blinds, venetian blinds, pleated blinds and
cellular blinds.
The installer, who must be a motorisation and home automation professional, must ensure that the
motorised product is installed in accordance with the standards in force in the country in which it is
installed such as EN 13120 relating to interior blinds.
Liability
Please read these instructions carefully before installing and using the drive. In addition to following
the instructions given in this guide, the instructions detailed in the attached Safety instructions
document must also be observed.
The drive must be installed by a motorisation and home automation professional, according to
instructions from Somfy and the regulations applicable in the country in which it is commissioned.

failure to comply with the instructions given in this guide and in the attached Safety instructions
document, absolves Somfy of any liability and invalidates the warranty.
The installer must inform its customers of the operating and maintenance conditions for the drive
and must provide them with the instructions for use and maintenance, and the attached Safety
instructions document, after installing the drive. Any After-Sales Service operation on the drive must
be performed by a motorisation and home automation professional.
Using this drive with any products which are not listed in the attached «Compatibility matrix» document
shall also render invalid any Somfy warranty and release Somfy from any liability.
If in doubt when installing the drive, or to obtain additional information, contact a Somfy adviser or go
to the website www.somfy.com.
TRANSLATED INSTRUCTIONS

Related product manuals