18
EN
Images not contractually binding Copyright © 2014-2018 Somfy Activités SA, Société Anonyme. All rights reserved.
2.3.5. Re-setting the end limits
motorised product.
For cassette awnings, the upper end limit is adjusted automatically, while the lower end limit can be
Readjusting the lower end limit
1)
Position the awning at the lower end limit.
2)
Press the Up and Down buttons simultaneously until the
awning moves: the motor is in setting mode.
3)
Adjust the awning’s bottom position using the Up or Down
buttons.
4)
Press the my button until the awning moves: The new
lower end limit position has been programmed.
Readjusting the upper end limit
1)
Position the awning at the upper end limit.
2)
Press the Up and Down buttons simultaneously until the
awning moves: the motor is in setting mode.
3)
Adjust the awning’s top position using the Up or Down
buttons.
4)
Press the my button until the awning moves: the new upper
end limit has been programmed.
Readjusting the lower end limit
1)
Position the awning at the lower end limit.
2)
Press the Up and Down buttons simultaneously until the
awning moves: the motor is in setting mode.
3)
Adjust the awning’s bottom position using the Up or Down
buttons.
4)
Press the my button until the awning moves: The new
lower end limit position has been programmed.
ADVANCED FUNCTIONS
Please contact the manufacturer of the motorised product before using these functions to
2.3.6. "Back impulse" function
This function is used to tension the fabric each time after the awning has been lowered. It can be
adjusted up to ½ turn of the roller tube.
To activate this function:
1)
Position the awning at the lower end limit.
2)
Press the my and Up buttons simultaneously until the
awning moves: the motor is in programming mode.
3)
Adjust the tension of the fabric using the Up or Down
button (1/2 turn of the max. tube).
4)
Press the my button until the awning moves: the fabric
tension has been programmed.
1
or
3
2
4
1 2
43
or
1 2
43
or
1 2
43
or
To Next Page
Loading...
