23
EN
Images not contractually binding
Copyright © 2014-2018 Somfy Activités SA, Société Anonyme. All rights reserved.
The sun function is inactive until the up, sown or wind appearance operations have returned
the motor to standard operating mode.
3.8. TIPS AND RECOMMENDATIONS FOR USE
3.8.1. Questions about the Sunea CSI io?
If the motorised product still does not work, contact a drive and home automation professional.
3.8.2. Replacing a lost or broken Somfy control point
To replace a lost or broken control point, contact a drive and home automation professional.
Observations Possible causes Solutions
The motorised product
does not operate.
The control point battery is low.
Check whether the battery is low and replace it
if necessary.
The drive is in thermal protection
mode.
Wait for the drive to cool down.
4. TECHNICAL DATA
Power supply 230 V ~ 50 Hz
Radio frequency 868-870 MHz io-homecontrol
®
two-way tri-band.
Frequency bands and maximum power used:
868.000 MHz - 868.600 MHz e.r.p. < 25 mW
868.700 MHz - 869.200 MHz e.r.p. < 25 mW
869.700 MHz - 870.000 MHz e.r.p. < 25 mW
Operating temperature - 20°C to + 70°C
Index protection rating IP 44
Safety level Class I
As the manufacturer, Somfy Activités SA, F-74300 CLUSES hereby declares that the drive covered by these instructions,
when marked for input voltage 230 V~50 Hz and used as intended according to these instructions, is in compliance with
the essential requirements of the applicable European Directives, in particular the Machinery Directive 2006/42/EC and
the Radio Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at www.somfy.com/ce.
To Next Page
Loading...
