Need help?Do you have a question about the SOMFY Sunilus io and is the answer not in the manual?
General| Motor Type | DC |
|---|---|
| Power Supply | 24 VDC |
| Maximum Torque | 6Nm |
| Protection Class | IP44 |
| Communication | io-homecontrol |
Explains the io-homecontrol® wireless communication protocol and its benefits for home automation.
Outlines the installer's responsibilities and general safety guidelines for product installation and use.
Provides critical safety instructions to follow, including avoiding liquid immersion, impacts, and drilling.
Details how to prepare the motor by fitting the crown and drive wheel and measuring the length.
Guides on preparing the roller tube, including cutting, deburring, and creating a notch.
Explains how to slide the motor into the roller tube and secure it with screws or rivets.
Describes how to attach the assembled tube-motor unit to the end and motor brackets.
Guides users on how to determine the current commissioning status of the motor based on its reaction.
Details the procedure to pre-program a Somfy io local control point to the motor.
Explains how to check and correct the motor's rotation direction using the Up button and 'my' button.
Step-by-step instructions for setting the upper limit position of the awning.
Step-by-step instructions for setting the lower limit position of the awning.
Describes how to program a control point using its PROG button after pre-programming.
Instructions for re-programming a control point after a power interruption.
Explains basic operation like using the favourite position and stop function.
Refers to external guides for operating the motor with sun or wind sensors.
Mentions that the motor sends messages managed by bi-directional control points.
Details how to set, modify, or delete the preferred intermediate position.
Directs users to refer to a corresponding guide for managing control points and sensors.
Provides instructions on how to readjust the upper and lower end limit positions.
Mentions the "Back impulse" function and its application/limitations.
A troubleshooting table listing possible causes and solutions for operational issues.
Refers to a corresponding guide for instructions on replacing a lost or broken control point.
Step-by-step guide to reset the motor to factory settings.
To Next Page