Installation preparations
8
Safety instructions
CAUTION!
DANGER OF DESTRUCTION BY VOLTAGE PEAKS.
Voltage peaks, e.g. from welding machines, can destroy
the control unit.
• Do not connect the control unit until all mounting tasks
on the power supply have been concluded.
CAUTION!
Before doing any work on the gate or operator, disconnect the
control unit from the power supply and secure it to prevent
reconnection.
Lay cables in conduits approved for this purpose, e.g. for laying
in underground installations.
Only qualifi ed electricians may connect the control unit to the power
supply.
Install in accordance with the installation and operating manual.
Before installing the operator, take locking mechanisms
(e.g. electric locks or bars) out of operation or disassemble them.
Ensure that the operator is securely fastened to posts, pillars, and gate
leaves to withstand large forces generated when opening and closing
the gate.
Flying sparks can damage the operator, e.g. when welding on posts
or gate leaves. Cover or disassemble operator before welding.
If a button is used for opening or closing, it must be installed out
of the reach of children at a height of at least 1.6 m.
Only use permissible fastening materials.
Tools required
14 mm M10 8,2 mm 17 mm2x
8mm
Mit SOMMER sind Sie immer gut ausgerichtet!
Personal protective equipment
Safety glasses (for drilling)
Work gloves
Scope of delivery
Check the scope of delivery before installation to prevent unnecessary
work and costs.
The actual scope of supply may vary depending on the operator
version.
c
l
o
s
e
o
pe
n
9
5
6
7
8
2
3
4
1
Complete set 1-leaf 2-leaf
Weight 9.1 13.8 kg
Package (L x W x H): 800 x 200 x 200 mm
1. Installation and operating manual 1 x 1 x
2. Operator with cable 1 x 2 x
3. Control unit in housing
(including radio receiver,
transformer, and power plug)
1 x 1 x
4. Hand-held transmitter, including
battery
1 x 1 x
5. Fittings for gate leaf 1 x 2 x
6. Fittings for post or pillar 1 x 2 x
7. Stainless steel hex bolt M10 x 45 2 x 4 x
8. Stainless steel locknut M10 2 x 4 x
9. Plug 2 x 4 x
Installation preparations
To Next Page
Loading...